10% off when you spend over £30!* Enter code CFSBH10. Limited time offer. Find out more.
Back to Cosyfeet Blog
How to create a strawberry planter
Back to Cosyfeet Blog
27 March 2024

Gardening tips: How to make a vertical strawberry planter

Make your own vertical strawberry tube to have the best strawberries you'll ever taste from your own garden!

Growing your own strawberries provides a healthy and nutritional way of incorporating organic fruit into your diet - packed full of rich, aromatic flavour. 

Strawberries are incredibly easy to grow and will thrive almost anywhere – in borders, containers or hanging baskets. A strawberry tower is an innovative way to grow lots of strawberry plants on a small plot of ground. It saves space by growing upwards which keeps the plants off the ground and out of reach from insects.

 

All you need is the following:

  • An electric drill with a hole-cutting bit that will cut a 5 – 7cm hole
  • A 2mm or 3mm drillbit for the watering pipe
  • A length of PVC downpipe 100mm or 150mm diameter
  • End cap for the downpipe
  • A narrower diameter (15mm or thereabouts) length of downpipe for watering - make it about 8cm-10cm longer than the downpipe
  • A cork
  • A knife
  • Duct tape
  • A length of geotextile (or hessian) for wrapping the watering pipe
  • Twine for tying the fabric to the watering tube
  • Good fertile soil
  • 1 litre of coarse gravel
  • Strawberry plants
  • A few companion plants (nasturtiums or marigolds)
  • Large tub or box (to stand unit in whilst filling)
  • Fixing collar or ties

Instructions:

Step 1: Cutting

Decide on the length of the unit and cut the tower tube and watering tube accordingly. Don’t forget to make the watering tube 8-10cm longer.

Step 2: Drilling the watering tube

Drill vent holes in the watering tube. Only drill these in the top 2/3 of the tube as the water will run down to the bottom plants. If you put holes all the way down, the upper planter won’t get quite enough water as it will all rush out of the lower holes.

Step 3: Completing the watering tube

Cut the geotextile or hessian to the shape that will cover the holes in the watering pipe. You don’t want roots getting in there and clogging it up.

Carefully, with a knife, whittle down the cork until it fits the end of the watering tube. Now seal it off with duct tape.

Step 4: Cutting the holes in the tower

Cut the holes in the tower tube. Remember -  only put holes on the surfaces that will get sunlight. Make 3 rows of holes and stagger them with holes about 20cm depth apart vertically. Leave the last 20cm intact with no holes.

Step 5: Filling

Place the large container against a wall – a corner is best so the tube is less likely to fall over. Place end cap over the base of the tube. Insert the watering tube then fill the bottom 10 cm with coarse gravel.

Step 6: Planting

For the lowest hole, plant a companion plant as there is less incentive for pests to climb up. When filling, it’s easiest to pour the soil from the top and poke the plants in the holes. Make every 6th one a companion plant.

Step 7: Watering

Make sure you water your plants daily in warmer weather and hopefully you’ll be enjoying delicious, home-grown strawberries all summer long. Happy gardening!